Node IP Addresses
All node-operators, please list your node's interface addresses on this page. This information is invaluable to the growth of the Seattle Wireless network, as it is necessary for accurately mapping the current network infrastructure. After including your information on this page, please list your wireless-specific information on the WirelessFrequencyCoordination table.
Please list your node name in the table below, as well as all associated IP addresses. Addresses should be listed in CIDR format ( Address / Mask Length ), followed by a type-code in parens. Valid type-codes are as follows:
A = AP-mode; E = External (Egress); H = Host-mode; L = Loopback; N = Null (Not Connected); P = Peer (Ad-hoc); T = Tunnel; W = Wired
(If a node has more than four interfaces, use another line. Please direct questions / comments to mhall@istages.net)
Node Name |
Interface #1 |
Interface #2 |
Interface #3 |
Interface #4 |
Example Node |
10.13.99.2/30 (P) |
10.254.3.1/24 (A) |
172.31.2.9/24 (W) |
12.48.25.8/23 (E) |
node queenanne |
10.22.17.1/24 (A/T/W) |
queenanne.net (P) |
|
|
