VALEMOUNT NETWORKS WAR4-MPW188B
The Valemount WAR4 is the same as the Compex WP188
Description
Enterprise class Access Point, with advanced wireless and routing features.
Uses the powerful 533 Mhz Intel IXP425 processor, with 4 mini-pci slots, single Ethernet. Uses 0.125 inch standoff or fits perfectly in the optional WarCase
*32 MB ram with 8 MB flash and 533 MHz IXP-425 CPU * Reverse Voltage and Transient Protection * 48V POE Input * Power to SPARE for 2 High Power radio cards and 2 medium to low power radio cards
The Boards come loaded with Valemounts own bootloader and StarV3 firmware. This can be change to load Compex's bootloader and firmware or Redboot with OpenWRT via the JTAG Connector.
There is no standard rs-232 populated port, but there is a ttl level serial port located at J6 and requires an adaptor. The manual has the correct pinout.
GENERAL INFORMATION
PROCESSOR |
Intel XScale IXP425Processor Operating at 533MHz |
MEMORY |
128MB SDRAM |
PHYSICAL PORTS |
4 x Type III Mini-PCI Slots |
DEBUG INTERFACE |
Serial (TTL) / JTAG (ARM-standard 20 pin ) |
OPERATING TEMPERATURE |
-20°C to 55°C |
OTHER FEATURES |
Push-button Reset |
LED INDICATORS |
8 LEDs total: |
DIMENSIONS |
180mm x 126mm x 2mm |
MINIPCI SUPPORT |
Supports up to 2 X 26dBm miniPCIs, and 2 X 20dBm miniPCIs in |
ENCLOSURE |
Directly mountable into Compex’s recommended WPM or WPMA |
* Specifications are subjected to change without notice
** JTAG Programmer available to reprogram the flash in case of loader corruption.
*** Serial Converter available to change the TTL signals on board to RS232 signals for debugging
**** Requires a 25W IEEE 802.3af Standard PoE Compatible for 4 MiniPCI’s to function properly
1 Heater Element: When apply power to board, it is automatically turned on. Firmware will turn it off after it is successfully loaded and running
Documentation
Here are a few documents found on this board
Data Sheet : WP188_Bareboard_DSv1.7.pdf
User Manual : WP188_Board_Product_Manual_Rev1.2.pdf
Board Layout
